Single battery, large reflector
CREE XP-L HI V3 LED
- Maximum Brightness of 1000 Lumens
- Maximum Beam Distance of 618m
- Maximum Intensity of 95,500 Candelas
Six Hundred Eighteen Meters Throw Distance
A CREE XP-L HI V3 LED working in conjunction with Nitecore’s PDOT reflector extend throw distance to 618 metres, boundary pushing performance makes it ideal for searching and hunting.
Compatible with an Array of Accessories
Gun mountable with GM02/GM03/GM04
Compatible with NFR50/NFG50 filters, turning the white LED into high power red/green LED, ideal for night hunting.
Designed for strategic placement of the remote switch when gun mounted, giving easy access to momentary illumination.
Precision Digital Optics Technology
PDOT provides extreme reflector performance, thus ensures superior beam uniformity.
Powered by a Single 18650 Battery, Maximum Runtime up to Six Hundred Eighty Hours
18650 batteries have higher power density, better energy storage and longer runtime by comparison. Fewer 18650 batteries are needed to achieve the same result performance-wise.
Includes Battery Magazine
The included battery magazine securely hold two CR123/RCR123 batteries, thus preventing battery rattling and increasing electrical conductivity.
Dual Switch User Interface
- Hold the switch partway down to enter momentary illumination
- Press the switch all the way down to turn ON/OFF the light
- Cycles through five brightness levels and three special modes.
Five Brightness Levels
Three Concealed Special Modes
- 1000 Lumen - Turbo
- 400 Lumen - High
- 220 Lumen - Mid
- 70 Lumen - Low
- 1 Lumen - Ultralow
- Location Beacon
Advanced Temperature Regulation (ATR) Module
Incorporated ATR module provides real-time monitoring for operating temperature, and adjusts output accordingly to maintain the P30 in optimal operating condition.
Doubles as a Portable Multi-Meter
Allowing battery inspection anywhere on the go.
When the light is turned off, hold down the mode switch while pressing the ON/OFF switch to activate the built-in power indicator, it will blink in various patterns to report battery voltage accurate to 0.1V